网站首页 > 物联资讯 > 技术分享

wpa_cli与wpa_supplicant的交互命令

2016-09-28 00:00:00 广州睿丰德信息科技有限公司 阅读
睿丰德科技 专注RFID识别技术和条码识别技术与管理软件的集成项目。质量追溯系统、MES系统、金蝶与条码系统对接、用友与条码系统对接

1)通过adb命令行,可以直接打开supplicant,从而运行wpa_cli,可以解决客户没有显示屏而无法操作WIFI的问题,还可以避免UI的问题带到driver。进一步来说,可以用在很多没有键盘输入和LCD输出的安卓终端产品的操作上。

        wpa_supplicant包含两个主要的可执行工具:wpa_supplicant和wpa_cli。wpa_supplicant是核心程序,它和wpa_cli的关系就是服务和客户端的关系:后台运行wpa_supplicant,使用wpa_cli来搜索、设置、和连接网络。

(2)在wpa_cli交互模式下可以执行很多命令,列表如下:

 

Full command

Short command

Description

status

stat

displays the current connection status

disconnect

disc

prevents wpa_supplicant from connecting to any access point

quit

q

exits wpa_cli

terminate

term

kills wpa_supplicant

reconfigure

recon

reloads wpa_supplicant with the configuration file supplied (-c parameter)

scan

scan

scans for available access points (only scans it, doesn‘t display anything)

scan_result

scan_r

displays the results of the last scan

list_networks

list_n

displays a list of configured networks and their status (active or not, enabled or disabled)

select_network

select_n

select a network among those defined to initiate a connection (ie select_network 0)

enable_network

enable_n

makes a configured network available for selection (ie enable_network 0)

disable_network

disable_n

makes a configured network unavailable for selection (ie disable_network 0)

remove_network

remove_n

removes a network and its configuration from the list (ie remove_network 0)

add_network

add_n

adds a new network to the list. Its id will be created automatically

set_network

set_n

shows a very short list of available options to configure a network when supplied with no parameters.

See next section for a list of extremely useful parameters to be used with set_network and get_network.

get_network

get_n

displays the required parameter for the specified network. See nextsection for a list of parameters

save_config

save_c

saves the configuration

 

(3)平台操作实例(仅限于MTK平台 且具ROOT权限)

 

        A,首先保证ADB连入,且能运行adb remount,这样避免系统文件只读。然后设置wpa_cli和wpa_supplicant有较强权限。

        B,运行echo 1 > /dev/wmtWifi,启动WIFI驱动。但是这个使能不会表现在安卓界面上层,默认是要在启动安卓时开启WIFI模块的,也即设置中的WIFI要默认ON。

        C,进入/system/bin目录,首先运行服务端wpa_supplicant。

./wpa_supplicant -iwlan0 -Dnl80211 -c/system/etc/wifi/wpa_supplicant.conf

正常启动后的回显如下:

技术分享

不可收入态表明该服务端已经在运行了(也可能是可输入状态,只要后面的wpa_cali可连接就行)。-i -D -c的参数意义可直接在Help中查询,具体有些参数可能因平台不同而有差异。

        D,另开启一个ADB SHELL,作客户端运行wpa_cali。如下:

cd /system/bin

wpa_cli -p /data/misc/wpa_supplicant

回显如下说明正常并处于交互模式:

技术分享

      E,执行一系列命令看看

scan

技术分享

scan_results

技术分享

        F,连WIFI的命令行,有以下几种:

for AP that doesn`t have encryption
>add_network (It will display a network id for you, assume it returns 0)
>set_network 0 ssid “666”
>set_network 0 key_mgmt NONE
>enable_network 0
>quit


for AP that has WEP
>add_network (assume returns 1)
>set_network 1 ssid “666”
>set_network 1 key_mgmt NONE
>set_network 1 wep_key0 “your ap passwork”(if usting ASCII, it need
double quotation marks, if using hex, then don`t need the double quotation
marks)
>set_network 1 wep_tx_keyidx 0
>select_network 1 (optional, remember, if you are connecting with another
AP, you should select it to disable the another)
>enable_network 1

for AP that has WPA-PSK/WPA2-PSK
>add_network (assume returns 2)
>set_network 2 ssid “666”
>set_network 2 psk “your pre-shared key”
>select_network 2 (optional, remember, if you are connecting with another
AP, you should select it to disable the another)
>enable_network 2

     我自己的实验图如下:

技术分享

以上过程就说明联网OK,可以上网了。

 

参考原文:http://cache.baiducontent.com/c?m=9f65cb4a8c8507ed4fece7631046893b4c4380146d96864968d4e414c42246100024b8ed7a66471980853a3c50f11e41bca770216c5d61aa9bc98b4addb9922b3bcd7a742613d51742c419de8a1c729f7e875a98ea42b3e1&p=8b2a975bcd8711a052eedb2f4a4c&newp=8b2a971f81822dec08e29e7d495d92695c02dc3051dcd14f2895ff0b&user=baidu&fm=sc&query=adb+shell+wifi&qid=&p1=4

参考原文:http://blog.sina.com.cn/s/blog_55465b470100l73l.html

wpa_cli与wpa_supplicant的交互命令

RFID管理系统集成商 RFID中间件 条码系统中间层 物联网软件集成