网站首页 > 物联资讯 > 技术分享

iwpriv

2016-09-28 00:00:00 广州睿丰德信息科技有限公司 阅读
睿丰德科技 专注RFID识别技术和条码识别技术与管理软件的集成项目。质量追溯系统、MES系统、金蝶与条码系统对接、用友与条码系统对接

AuthMode             {OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE}

                        ::Set Authentication Mode 

EncrypType           {NONE,WEP,TKIP,AES}          
::Set Encryption Type

 

DefaultKeyID         {1~4}                              
::Set Default Key ID

 

Key1                  {5 ascii characters or 10 hex number or 
                      13 ascii characters or 26 hex numbers}
                      ::Set Key1 String                                                                                                                        


Key2                 {5 ascii characters or 10 hex number or 
                      13 ascii characters or 26 hex numbers}                                                                                                                        
                      ::Set Key2 String
                                
Key3                 {5 ascii characters or 10 hex number or 
                      13 ascii characters or 26 hex numbers}                                                                                                                        
::Set Key3 String
 
Key4                 {5 ascii characters or 10 hex number or 
                      13 ascii characters or 26 hex numbers}                                                                                                                        
                        ::Set Key4 String

 

WPAPSK               {8~63 ascii or 64 hex characters}  
::WPA Pre-Shared Key

Examples
===================================================================
-------------------------------------------------------------------------------------------------------
a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=OPEN
3. iwpriv ra0 set EncrypType=NONE
4. iwpriv ra0 set SSID="AP's SSID"

b> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=SHARED
3. iwpriv ra0 set EncrypType=WEP
4. iwpriv ra0 set DefaultKeyID=1
5. iwpriv ra0 set Key1="AP's wep key"
6. iwpriv ra0 set SSID="AP's SSID"

c> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPAPSK
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"
6. iwpriv ra0 set SSID="AP's SSID"

d> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPAPSK
3. iwpriv ra0 set EncrypType=AES
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"
6. iwpriv ra0 set SSID="AP's SSID"


e> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPA2PSK
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK=12345678
6. iwpriv ra0 set SSID="AP's SSID"

f> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Adhoc
2. iwpriv ra0 set AuthMode=OPEN
3. iwpriv ra0 set EncrypType=NONE
4. iwpriv ra0 set SSID="Adhoc's SSID"


g>  Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)
    1. iwpriv ra0 set NetworkType=Adhoc
2. iwpriv ra0 set AuthMode=WPANONE
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK=12345678
6. iwpriv ra0 set SSID="AP's SSID"
  
h> Get site survey 
usage: iwpriv ra0 get_site_survey

RFID管理系统集成商 RFID中间件 条码系统中间层 物联网软件集成